Flexible Graphite-50 μm
Catalog NO.: AIMRSE-CHM-ADD-090 Manufacturer PN: CHM-GRP-50U
• Temperature resistance exceeding 260°C; suitable for all types of drilling fluid systems: water-based, oil-based, and synthetic-based; its high elasticity and high compression ratio allow it to fill fractures and pore spaces.
As a plugging agent to seal pores and small induced or natural fractures; can also be directly added to circulating mud to prevent and treat leaks while reducing sticking risks; in water-based drilling fluids, it can serve as a lubricant to reduce sticking.
This plugging agent is a highly elastic graphite material with an average particle size of 50 microns. Used as a bridging plug to address fluid loss encountered in natural or induced fractures during drilling, its mechanism of action is as follows: under pressure differential, it is forced into fractures or voids. Its self-expanding characteristic allows the material to naturally rebound to a certain extent, firmly anchoring itself within the void like an expansion bolt. It is difficult to remove and does not contract. These sealing characteristics enable its widespread application in plugging depleted formations to mitigate the risk of sticking caused by pressure differentials.
| Type | Leak-off Control Agents |
| Recommended Dosage | For preventing leakage or treating seepage, the dosage is: 40-60 kg/m³; For treating moderate loss, the dosage is: 60-150 kg/m³; When used as a lubricant in water-based drilling fluid, the dosage is: 30 kg/m³ |
| Appearance | Pure black granules |
| Specific Gravity | 1.82 |
| Specifications | 50 μm |
| Packaging | 25 kg/bag |