Ozone O3 Sensor
Catalog NO.: AIMRSE-LAB-SEN-041 Manufacturer PN: LAB-O3-SEN
• Ultra-short response time, no sample agitation required; unaffected by turbid or colored liquids
Used for in-situ measurement of dissolved ozone concentration in aqueous solutions.
The O3 sensor employs an amperometric detection principle for in-situ measurement of dissolved ozone concentration in aqueous solutions. It is suitable for profiling measurements and various underwater systems. The sensor incorporates a permeable membrane through which O3 in the measured substance diffuses as a gas partial pressure. This O3 reacts chemically with the electrolyte, generating a current signal at the working electrode that is proportional to the dissolved ozone partial pressure.
| Material | Titanium metal with integrated electronics |
| Size | Diameter: 24 mm, Length: 235 mm |
| Range | 0.02-10 mg/L |
| Accuracy | 2%FS |
| Operating Voltage | 9-30 V DC |
| Output Signal | 0-3 V DC |
| Operating Temperature | -2°C-30°C |
| Response Time | t90% < 4.5 s |
| Connection | SUBCONN BH-4-MP (Customizable) |
| Depth | 100 m |
| Analytical Methods | Amperometric method |