U-Bolt Pressure Transmitter
Catalog NO.: AIMRSE-LAB-SEN-010 Manufacturer PN: LAB-UB-PT
• High reliability, corrosion resistance, exceptional long-term stability
For slurry pressure measurement in oilfield drilling, cementing, fracturing operations, etc.
The flanged pressure transmitter employs a specialized structural design and strain isolation technology to minimize zero drift caused by installation stresses, significantly enhancing long-term stability. Components in contact with the pressure medium exhibit excellent resistance to mechanical wear and corrosion from aggressive media like H2S. The coarse, shallow front pressure port design effectively prevents slurry blockage and facilitates maintenance.
| Material | 316L stainless steel |
| Accuracy | 0.2%FS, 0.5%FS |
| Operating Voltage | 10-32 V DC |
| Output Signal | 4-20 mA, 0-5 V DC, 1-5 V DC |
| Operating Pressure | 0-35 MPa, 70 MPa, 105 MPa, 140 MPa 0-5000 PSI, 10000 PSI, 15000 PSI |
| Operating Temperature | -40-+85°C |
| Calibrated Temperature | -25-+70°C |
| Protection Rating | IP67 |
| Impact Resistance | 50 g / 1 ms |
| Tested Media | Cement slurry, drilling mud, fracturing fluid, etc. |
| Response Time | ≤ 1 ms |
| Insulation Resistance | ≥ 500 MΩ/100 V |
| Breaking Pressure | 500%FS |
| Long-Term Stability | 0.1% FS/year |
| Connection | Yin-Ren chuck-type seal |
| Relative Humidity | 0-100% RH |