Dry Vacuum Pump

Q: What is the maintenance interval for the tip seals in an AIMRSE dry scroll pump?

Under standard laboratory conditions, PTFE-based tip seals require replacement every 8,000 to 10,000 operational hours. High vapor loads or corrosive environments may reduce this, though the integrated gas ballast system helps mitigate condensable accumulation.

Q: Can these dry pumps be used to back turbo-molecular pumps in Ultra-High Vacuum (UHV) systems?

Yes. Dry scroll pumps provide a hydrocarbon-free foreline, preventing oil back-streaming from contaminating the high-vacuum stage. This allows turbo-molecular pumps to reach ultimate UHV base pressures with significantly higher process purity.

Q: Are dry vacuum pumps compatible with pumping condensable solvent vapors or water vapor?

Yes, provided the gas ballast is utilized. It prevents vapor from reaching its dew point during compression. For high-concentration solvent applications, an inlet cold trap is recommended to extend seal life.

Request a Quote

Cat	Products Name	Key Features
VGE-DVP-041	Dry Vacuum Pump-4.3M3HR	4.3m³/hr capacity; 55dB; G1/4"
VGE-DVP-042	Dry Vacuum Pump-0.5M3HR	0.5m³/hr ultra-compact; 52dB; 14.3kg
VGE-DVP-043	Dry Vacuum Pump-0.7M3HR	0.7m³/hr flow; 52dB noise; G1/8"
VGE-DVP-044	Dry Vacuum Pump-3M3HR	3m³/hr pumping; 48dB; KF25 ports
VGE-DVP-045	Dry Vacuum Pump-3.6M3HR	3.6m³/hr capacity; 48dB; Convection cooled
VGE-DVP-046	Dry Vacuum Pump-4.8M3HR	4.8m³/hr flow; 52dB; 30.9kg
VGE-DVP-047	Dry Vacuum Pump-6M3HR	6m³/hr pumping; 52dB noise; KF25
VGE-DVP-048	Dry Vacuum Pump-13M3HR	13m³/hr capacity; 58dB; 55kg
VGE-DVP-049	Dry Vacuum Pump-15.5M3HR	15.5m³/hr flow; 58dB; Convection cooled
VGE-DVP-050	Dry Vacuum Pump-26M3HR	26m³/hr pumping; 62dB; KF40 inlet

Advanced Dry Pumping & Hydrocarbon-Free Generation

In high-precision analytical and fabrication cycles, the presence of even trace lubricants in the swept volume can lead to catastrophic process failure. AIMRSE dry vacuum pumps are engineered to deliver robust kinetic gas evacuation without the use of sealing or lubricating fluids in the compression stages. This architecture eliminates the threat of hydrocarbon back-diffusion, ensuring the absolute dielectric integrity of semiconductor wafers and the purity of mass spectrometry ion paths.

Our dry pumping systems—primarily centered on high-efficiency scroll and multi-stage dry architectures—are designed to provide constant pumping speeds from atmospheric pressure down to the medium-vacuum regime. By leveraging advanced thermal management and precision-machined orbital geometries, AIMRSE provides the reliable, maintenance-lite backing required for turbo-molecular systems and cleanroom-isolated laboratory stations.

Consult Our Pumping Specialists

Evaluate your gas-load requirements and cleanroom compliance needs with our senior fluid dynamics team.

Global engineering support available within 24 hours.

Kinetic Architecture & Compression Physics

Orbital Scroll Compression

Utilizing nested involute spiral geometries, our dry scroll pumps create a sequence of crescent-shaped gas pockets that diminish in volume during orbital motion. This continuous compression cycle drives gas from the peripheral inlet to the central exhaust without the need for valves or lubricants, facilitating a smooth, pulse-free flow that is ideal for sensitive analytical vibration-isolation mounts.

Advanced Vapor Load Management

Condensable vapors can degrade ultimate pressure and cause internal corrosion. AIMRSE dry pumps integrate a multi-stage gas ballast system that introduces a controlled flow of dry nitrogen into the final compression stage. This reduces the partial pressure of condensables below their saturation point, allowing water vapor and solvent traces to be exhausted in the gaseous phase, preserving pump longevity.

Hermetic Integrity & Tip Seal Technology

The boundary between atmospheric pressure and vacuum is maintained via proprietary PTFE-composite tip seals. These seals are precision-tensioned to compensate for wear while providing a low-friction interface with the scroll flanks. Combined with double-shielded, grease-isolated bearings, our pumps ensure zero-leakage performance and prevent any particulate generation from entering the primary vacuum stream.

The Advantages of AIMRSE

Eliminating contamination risk through oil-free kinetic innovation.

Hydrocarbon-Free Path

Absolute elimination of oil back-streaming, protecting delicate samples and UHV chambers from organic contamination.

Low Acoustic Footprint

Optimized orbital balancing and sound-dampening enclosures ensure a quiet laboratory environment below 52 dB(A).

Minimal Maintenance

No oil changes or filtration disposal required. Long-life tip seals extend standard service intervals up to 2 years.

Cleanroom Ready

Oil-free construction and hermetic sealing prevent particulate outgassing, meeting ISO Class 4 cleanliness standards.

Standards & Metrology Compliance

The performance characteristics of AIMRSE dry vacuum pumps are strictly verified against international vacuum technology benchmarks. Pumping speed and ultimate pressure quantifications are executed in full accordance with ISO 21360-1 (Vacuum pumps — Standard methods for measuring performance-characteristics). Equipment safety and environmental integration comply with the CE Machinery Directive and UL/CSA electrical protocols. Furthermore, our pumps are manufactured within an ISO 9001:2015 framework, ensuring every unit meets the stringent cleanliness requirements for the REACH & RoHS directives, guaranteeing zero hazardous substances in the vacuum path.

Technical FAQ

What is the maintenance interval for the tip seals in an AIMRSE dry scroll pump?

Under standard laboratory conditions pumping clean, dry air, the PTFE-based tip seals typically require replacement every 8,000 to 10,000 operational hours (approximately 1.5 to 2 years of continuous use). Operating with high vapor loads or in corrosive environments may reduce this interval; however, our integrated gas ballast system helps mitigate this by preventing condensable accumulation.

Can these dry pumps be used to back turbo-molecular pumps in Ultra-High Vacuum (UHV) systems?

Absolutely. Dry scroll pumps are the preferred choice for backing turbo-molecular systems because they provide a hydrocarbon-free foreline. This prevents oil back-streaming from contaminating the high-vacuum stage, allowing the turbo pump to reach its ultimate UHV base pressure (down to $10^{-8}$ Pa) with significantly higher process purity.

Are dry vacuum pumps compatible with pumping condensable solvent vapors or water vapor?

Yes, provided the gas ballast is utilized. By introducing a small amount of dry gas into the compression chamber, the pump prevents the vapor from reaching its dew point during the compression stroke. For high-concentration solvent applications, we recommend the addition of a cold trap at the inlet to protect the pump internal geometries and extend seal life.

Related Products

Note: Our vacuum equipment is for research and industrial testing only. Industrial-grade components are fully rated for field deployment.

Contact Form