RF & mmWave Testing
In advanced wireless communication R&D, precision at high frequencies is the currency of innovation. Standard test setups often struggle with parasitic capacitance, impedance mismatch, and phase instability when characterizing next-gen 5G/6G devices, MMICs, and RF front-ends. AIMRSE RF & mmWave Solutions eliminate these variables. We provide ultra-stable, high-precision probe systems optimized for Vector Network Analyzer (VNA) integration up to 110GHz and beyond. We bridge the gap between raw high-frequency signals and reliable, publishable S-parameter data, ensuring your measurements validate your design.
Critical RF Testing Challenges
Before selecting a solution, it is essential to understand the common high-frequency pitfalls that can compromise your S-parameter and noise figure data.
High-Frequency Signal Loss
At mmWave frequencies, even minor parasitic capacitance, cable flexing, or impedance mismatch can ruin your measurements. Our solutions utilize rigid platen architectures, premium RF cables, and optimized signal paths to minimize insertion loss, phase shift, and standing wave ratios (VSWR).
On-Wafer Calibration Accuracy
Calibrating up to 110GHz requires exact probe placement. A slight misalignment on the calibration substrate compromises the error model. We provide sub-micron positioning and vibration-free environments to ensure flawless SOLT, LRM, and LRRM de-embedding.
Probe Contact Repeatability
Microwave probes (GSG/GS) are expensive and require highly consistent overtravel to ensure stable contact resistance without skating or pad damage. Our ultra-stable platens and micrometer-driven positioners guarantee repeatable, safe landings for delicate RF probes.
Core Applications
Tailored configurations for the most demanding high-frequency device characterization scenarios.
5G & 6G RFIC / MMIC
On-wafer S-parameter, noise figure, and load-pull measurements for next-generation telecommunication chips. Ensure high gain, linearity, and power efficiency for Sub-6GHz and mmWave broadband amplifiers.
Automotive Radar (77-81GHz)
Validate FMCW radar transceivers used in modern ADAS systems. Our setups offer the high-stability probing environments essential for accurate phase and frequency characterization at E-band frequencies.
Antenna-in-Package (AiP)
Specialized RF chucks and non-interfering probe arms designed to support near-field scanning and highly integrated module testing, ensuring minimal electromagnetic interference with radiating elements.
System Architecture & Core Advantages
AIMRSE platforms are engineered with core pillars to ensure precision and signal integrity in every high-frequency measurement.
Why RF Precision Architecture Matters
Standard DC probe stations are cost-effective, but they become the bottleneck in mmWave characterization. We solve these critical RF engineering limitations.
Precision Planarization
Microwave probes require exact planarization (alignment of all probe tips to the pad). Our highly stable RF Micro-Positioners ensure perfectly balanced GSG tip contact, critical for reducing contact resistance and avoiding pad damage.
Seamless VNA Integration
Long cable runs destroy high-frequency signals. Our system architecture features heavy-duty platens that allow Vector Network Analyzer (VNA) frequency extenders to be mounted directly adjacent to the probe, ensuring the shortest possible signal path.
EMI & Vibration Isolation
External mechanical vibrations cause phase noise and contact fluctuations. We counteract this by integrating massive Anti-Vibration Platforms and customized RF shielding to isolate your DUT from mechanical and electromagnetic interference.
RF and mmWave characterization is the foundation of modern wireless technology modeling. As frequencies push into the sub-THz range for 6G, the margin for error disappears. AIMRSE provides a comprehensive ecosystem of probing solutions engineered to maximize signal integrity — from manual setups for quick S-parameter checks to fully automated RF systems for extensive wafer mapping.
Trusted by RF Labs & Industry Leaders
Our global footprint demonstrates our commitment to supporting the world's most advanced high-frequency semiconductor research.
Fabless RF Designers
Leading-edge RFIC development demands ultimate measurement accuracy.
Node Scaling: Support for advanced SOI, GaAs, and SiGe BiCMOS structures, providing the stability needed for precise modeling.
First-Pass Success: High-accuracy S-parameter data reduces the need for costly silicon re-spins.
Telecom & 5G R&D
Pushing the boundaries of bandwidth and data rates.
High-Frequency Bands: Validating power amplifiers (PAs) and low noise amplifiers (LNAs) for mmWave infrastructure.
Over-the-Air (OTA): Integrated probing solutions compatible with advanced phased array antenna testing.
Automotive & Aerospace
Safety-critical systems require robust high-frequency testing.
Radar & Satcom: Ensuring the reliability of 77GHz ADAS radar chips and Ka-band satellite communication transceivers.
Temperature Dependency: Integrated thermal chucks allow RF performance validation under extreme environmental stress.
Academic Research Labs
Exploring the frontiers of Terahertz (THz) physics.
Terahertz Exploration: Providing custom waveguide integrations for sub-THz and 6G experimental device characterization.
Versatility: Modular systems that adapt easily from DC to mmWave as research projects evolve.
Engagement Model
Our structured workflow ensures a seamless transition from initial concept to a fully operational RF test bench.
Objective: Understand your high-frequency requirements and equipment constraints.
Services:
- Technical Consultation: We analyze your target frequency range (e.g., 40GHz, 67GHz, 110GHz+), port requirements, and pad layouts.
- VNA Compatibility: Ensure seamless mechanical and electrical integration with your preferred Vector Network Analyzer (Keysight, Anritsu, Rohde & Schwarz).
Objective: Design a tailored RF architecture that minimizes signal loss.
Services:
- Component Selection: Choose the appropriate RF chucks, microwave micro-positioners, and probe configurations (GSG, GS).
- Frequency Extender Mounting: Design custom brackets and platens to safely support heavy VNA extender heads close to the DUT.
Objective: Deliver and install the RF system in your lab with minimal downtime.
Services:
- Precision Setup: Our engineers assemble the anti-vibration table, level the platen, and mount the frequency extenders securely.
- Cabling Verification: Carefully route phase-stable RF cables and waveguides to avoid stress or bending damage.
Objective: Validate RF measurement accuracy and empower your team.
Services:
- On-Wafer Calibration: Perform initial SOLT/LRRM calibrations using Impedance Standard Substrates (ISS) to verify baseline accuracy.
- Operator Training: Teach best practices for RF probe planarization, safe landing, and contact repeatability to extend probe life.
Objective: Maintain peak RF performance throughout the system lifecycle.
Services:
- Preventive Maintenance: Regular checks on platen stability, chuck planarity, and micro-positioner drift.
- RF Consumables: Reliable supply chain for replacement microwave probe tips (GSG/SG), RF cables, and calibration substrates.
RF & mmWave Characterization FAQ
Find answers to common technical questions regarding our high-frequency probe systems.
What frequency ranges do your RF probe systems support?
What types of RF probes and pitches do you offer?
How do you handle on-wafer calibration (De-embedding)?
Can I mount my VNA frequency extenders directly on the probe station?
Is temperature-dependent RF testing supported?
Ready to Optimize Your High-Frequency Testing?
Whether you are validating 77GHz automotive radar or exploring mmWave front-ends for 6G, our engineering team is ready to configure the perfect RF probe station for your lab. Don't let signal loss compromise your data.
Note: All AIMRSE probe systems and components are designed exclusively for professional semiconductor R&D and industrial testing. Equipment must be operated by trained personnel in accordance with standard laboratory safety protocols.
Contact Form
